Polyblend Sanded Grout technical data sheet
Product-specific optional sealing; Curing depends on conditions; Movement-joint requirements
Reviewed 2026-10-08
The primary references behind the guide library. Product examples illustrate distinctions; current regional instructions govern the actual installation.
Product-specific optional sealing; Curing depends on conditions; Movement-joint requirements
Reviewed 2026-10-08
Non-acidic cleaner example; Follow label and protective measures
Reviewed 2026-10-08
Recolouring differs from replacement; Preparation and product-specific overlays
Reviewed 2026-10-08
Tile layer is not waterproof; Membrane and drain are system components
Reviewed 2026-10-08
Flexible joints at designated corners and transitions
Reviewed 2026-10-08
No sealing required for this product; Steam/submersion limits; Coverage varies with joint and tile geometry
Reviewed 2026-10-08
Penetrating grout sealer provides stain protection
Reviewed 2026-10-08
Never mix cleaners; Label-directed ventilation and protection
Reviewed 2026-10-08
Correct moisture problems; Seek help with extensive mould
Reviewed 2026-10-08
Cracking can have installation or substrate causes
Reviewed 2026-10-08
Local disposal route must be checked
Reviewed 2026-10-08
Movement, inadequate packing, excess liquid and adding water after hydration begins can cause grout failure; repair generally requires removing at least two-thirds of the old grout depth.; A site inspection may be needed..
Reviewed 2026-10-09
Tile coverings are not inherently waterproof; a complete moisture-management assembly, including the drain and transitions, is needed.; Different shower systems manage water differently..
Reviewed 2026-10-09
Uncoupling membranes do not eliminate perimeter and field movement joints; temperature, moisture and loading create stresses..
Reviewed 2026-10-09
Do not mix cleaning products.; Bleach with ammonia or acids can release hazardous gases.; Follow labels, ventilation and protective-equipment directions..
Reviewed 2026-10-09
Disturbing silica-containing materials can create respirable dust; exposure controls matter during cutting and grinding..
Reviewed 2026-10-09
A neutral-pH cleaner approved for grout and specified stone/tile surfaces; remove loose dirt, follow dilution and dwell instructions, agitate with a compatible brush, and collect dirty solution before it dries..
Reviewed 2026-10-09
Example product-specific mixing, slaking, cleanup, installation-temperature and cure instructions.; Requires sound bonded tile; not for movement joints; some finishes may scratch.; Exterior protection requirements extend beyond installation day..
Reviewed 2026-10-09
Rapid-setting fine-aggregate cement grout; no resting/slake time for this product; maintain correct water ratio and do not add water as it thickens.; Sealer is not typically required.; Delicate surfaces need a mockup..
Reviewed 2026-10-09
Penetrating sealer for stain protection; clean dry compatible surfaces and a test area are required; remove excess before it dries.; Sealer does not prevent surface wear or acid etching..
Reviewed 2026-10-09
Flexible sealant for suitable corners, changes of plane and expansion joints.; Remove old sealant/contamination and work on clean dry joints; use specified back-up material and geometry; protect until fully cured..
Reviewed 2026-10-09
100% silicone with flexibility for change-of-plane and joint applications in tile and stone.; Colour matching is available..
Reviewed 2026-10-09
Two-component epoxy grout; no sealer required; stain resistance still requires prompt cleaning and maintenance.; Check joint width and tile restrictions; a test board is recommended for delicate finishes..
Reviewed 2026-10-09
Acidic cement-haze remover is for compatible acid-resistant surfaces, not epoxy/premixed haze.; Acids can etch or change cementitious materials, metallic glazes, marble, limestone and travertine.; This product specifies at least 10 days grout cure..
Reviewed 2026-10-09
Different chemistry for certain premixed, urethane and light epoxy haze.; Product is alkaline/corrosive despite being non-acidic; avoid skin contact, scrubbing joints and excessive cleanup water.; Timing varies with grout type/age..
Reviewed 2026-10-09
Grout colourant/sealer renews cement-grout colour; requires cured dry clean joints free of contaminants and incompatible sealers.; Apply a thin even coat, test first, and protect porous tile from absorption.; Not for underwater use..
Reviewed 2026-10-09
Exterior material selection depends on climate and exposure; harsh freeze/thaw conditions require an appropriate complete mortar/tile/grout system.; Follow exact grout data for application and cleaning..
Reviewed 2026-10-09
Water ratio, early/excessive washing, retained spacers/mortar, inconsistent batches, dirty tools/water and exposure can affect grout appearance..
Reviewed 2026-10-09
Epoxy-grout example and product-specific limitations; No grout sealer required for this product; Delicate stone and glass need compatibility testing; Epoxy grout does not replace a waterproofing membrane
Reviewed 2026-10-09
Acidic cement-haze remover example; Exclusions for marble and polished stone and warnings for some glazes and metals
Reviewed 2026-10-09
Non-acidic remover designed for certain premixed, urethane and light epoxy residues; Haze-remover selection depends on grout chemistry
Reviewed 2026-10-09
Acid and abrasive sensitivity of stone; Excess cleaner can leave a film; Sealing improves stain resistance and does not make stone stainproof
Reviewed 2026-10-09
Penetrating sealer for stain protection; This product allows moisture-vapour transmission
Reviewed 2026-10-09
Screen colours approximate an installed finish; Grout contrast changes how prominently the tile pattern reads; Sample and product choice should be considered together
Reviewed 2026-10-09